VBR BLADE

Plow bolts and nuts

Plow bolts and nuts to mount VBR grader blades. Add them to your blade order and we quote both together.

A plow bolt has a countersunk head and a square neck. The square neck sits in the square countersunk hole of the cutting edge, so the bolt does not turn while the nut is tightened, and the flat head stays flush with the face of the blade.

Grade and length are confirmed in the quote. If you are not sure which bolt you need, send the blade part number and the moldboard model: we will check the bolt size against the blade.

Bolts wear together with the cutting edge, so many fleets replace them at every blade change. Read plow bolts, nuts and blade replacement for a short checklist.

Bolt sizes of the blades in our list

The blades in our list take 5/8″ or 3/4″ plow bolts. The bolt size of each blade is shown in the grader blade table and on every part page.

BoltPart no.
5/8″5D9553 (13) · 5D9554 (15) · 5D9562 (13) · 5D9561 (15) · 5D9556 (13) · 5D9557 (15) · 5D9558 (13) · 5D9559 (15) · 4T2244 (13) · 4T2242 (15)
3/4″7D1158 (15) · 7D1576 (13) · 7D1577 (15) · 4T2231 (13) · 4T2233 (15)

What to tell us

  • Bolt size: 5/8″ or 3/4″
  • Quantity (one bolt and one nut per hole)
  • The blade part numbers they are for
  • Bolt length, if you know the length used on your machine